Does trickle ICAP feedback work when always-verify-source is enable on the ProxySG?


<< Back to Knowledge Search

Solution

Overview

Yes.  When always-verify-source is enabled, the HTTP proxy treats the requests as non-interactive.  Please configure trickle ICAP feedback for Non-Interactive Traffic when always-verify-source is enabled. 

 To turn on trickle ICAP feedback for non-interactive traffic, please do the following:

  1. Go into the Management Console (https://<ip.address.of.proxysg>:8082/)
  2. Click on the Configuration tab.
  3. Go to External Services > ICAP > ICAP Feedback tab. In the "ICAP Feedback for Non-Interactive Traffic", enable feedback and select whether you should trickle object data from the start or end.
  4. Click on Apply to save your changes.
Cause
Resolution
Workaround
Additional Information
Bug Number
InQuira Doc IdFAQ803
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Software      SGOS 5, SGOS 6
Article Number      000009207
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat