How can I configure my ProxySG to enable/disable AV scanning based on the Source IP address?


<< Back to Knowledge Search

Solution

Overview

To configure (enable or disable) AV scanning based on the source IP address of a request you must use CPL as shown in the following example:

  1. Access the ProxySG Management Console.
  2. Go to Configuration > Policy > Policy Files.
  3. Select Text Editor from the Install Local File From: drop box and click on Install.
  4. Add the following CPL in the window that displays.

    <cache>
    client.address=x.x.x.x response.icap_service(yes)

 where x.x.x.x is the source IP address and icap_service is the name of the ICAP service configured on the ProxyAV appliance.


Note: The above CPL enables scanning for the specified source IP addresses. Replace "yes" with "no" to disable AV scanning for the specified IP addresses.

 

Cause
Resolution
Workaround
Additional Information
Bug Number
InQuira Doc IdFAQ2014
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Software      ProxyAV 3, SGOS 5, SGOS 6
Article Number      000009704
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat