How can I determine what bootloader version is installed on my PacketShaper from the CLI ?


<< Back to Knowledge Search

Solution

Overview

In order to view the current bootloader information, please use the CLI command "sys info".  See the example below of "sys info" command output.

=======================================================

PacketShaper# sys info
CPU Brand:  GenuineIntel (Pentium Compatible)
CPU Speed:  1201 MHz (measured)
Memory:     511 MB RAM, 120.2MB Flash total, 99.8MB Flash available
Firmware:   EM-8510 Ver.ACA 2006-08-31
Bootloader: M2 Bootloader v7.0
=======================================================

Cause
Resolution
Workaround
Additional Information
Bug Number
InQuira Doc IdFAQ1076
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      PacketShaper
Software      PacketWise 7, PacketWise 8
Article Number      000009819
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat