How do I change the MTU size on the ProxySG?


<< Back to Knowledge Search

Solution

Overview

To change the MTU size, please follow the steps below.

1. Login to the Command Line Interface of the ProxySG via SSH, using any familiar SSH client, e.g. Putty or Hyperterminal

2. Once logged in, get into the enable mode, as below and follow the steps.

Blue Coat SG300 Series>enable

Blue Coat SG300 Series#conf t

Blue Coat SG300 Series#(config)interface 0

Blue Coat SG300 Series#(config interface 0)mtu-size <mtu size>

 

Cause
Resolution
Workaround
Additional Information
Bug Number
InQuira Doc IdFAQ103
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Topic      Networking
Article Number      000010190
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat