How do I change the ProxySG appliance CLI enable password?


<< Back to Knowledge Search

Solution

Overview
How to change "enable" password on ProxySG:
  1. Login to the Command Line Interface (CLI) and enter "Enable"
  2. In the "Configuration Terminal" mode, give the following prompt: security enable-password password

Note: password is the new enable password and can be replaced with your own password. For example:

Output from CLI prompt:

Blue Coat SG210 Series#enable
Enable Password:
Blue Coat SG210 Series#config t
Enter configuration commands, one per line.  End with CTRL-Z.
Blue Coat SG210 Series#(config)security enable-password admin
ok
 
Where admin is your own password.

If you have lost the enable password, use the following KBs to reset it:

  • 000010613 - Reset enable password through CLI.
  • 000010635 - Reset enable password through GUI (Management Console).

 

Cause
Resolution
Workaround
Additional Information
Bug Number
InQuira Doc IdFAQ2121
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      DLP, ProxySG
Software      SGOS 4, SGOS 5, SGOS 6
Topic      Configuration / WUI / CLI
Article Number      000010172
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat