How do I configure the DNS proxy?


<< Back to Knowledge Search

Solution

Overview

How do I configure the DNS proxy?
How do I setup the DNS proxy?

Cause
Resolution

By default, a DNS proxy service is created, but not enabled. To enable the DNS proxy in the Management Console go to Configuration > Services > Service Ports or Proxy Services.  Then set it from Bypass to Intercept and save your changes.

Note: The ProxySG is not a DNS server. It does not perform zone transfers, and recursive queries are forwarded to other name servers.

You can configure the DNS proxy from the CLI using the following commands.
SGOS#(config)services
SGOS#(config services)dns
SGOS#(config services dns)create ip_address:port

For more information about the DNS proxy, including how to create a DNS proxy resolving name list through the CLI, please refer to Managing the DNS-Proxy in Chapter 5 of the Configuration and Management Guide (CMG).

Workaround
Additional Information
Bug Number
InQuira Doc IdKB1283
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Topic      Networking, Services
Article Number      000010221
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat