How do I configure the ProxySG to communicate with a secure LDAP server?

<< Back to Knowledge Search



1. Get the self-signed certificate generated by the secure LDAP server (in a PEM format).

2. Install the self-signed certificate on the ProxySG.

  • Open the management console, select the configuration tab >SSL > CA certificates.
  • Click Import.
  • Provide a name for the new certificate (such as secure_ldap) and paste the certificate details into the text box.  Click OK, then Apply.
  • Next, go to SSL > CA Certificates and click on the CA Certificate lists tab.
  • Edit the 'Browser-trusted' CA certificate list.
  • Add the 'secure_ldap' certificate to the list on the right. Click OK, then Apply.

3. Edit the ‘default’ device profile.

  • Select Configuration > SSL > Device Profiles.
  • Highlight ‘default’ and click Edit.

3. Change the Keyring value from None to Default. Click OK, then Apply.

4. At the LDAP authentication realm.

  • Under the LDAP Servers tab, select the ‘Enable SSL’ check box and make sure that the ‘SSL device profile’ is set to ‘default’.
Additional Information
Bug Number
InQuira Doc IdFAQ1691

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Topic      Authentication
Article Number      000010240
Was this helpful?
Previous MonthNext Month