How do I enable the Overload Bypass feature?


<< Back to Knowledge Search

Solution

Overview

To enable the Overload Bypass feature which was added in SGOS version 5.2.4.3 and later, the Command Line Interface is used as follows:

#(config)general
#(config general)resource-overflow-action bypass
    ok

Once this feature is enabled, if the ProxySG is ever under extreme traffic load, new connections will be bypassed.  Once the extreme traffic load cause is eliminated, the bypassed connections will continue to be bypassed but new connections will be handled normally with all policy and configuration taking effect.

Note: when connections are bypassed, all policy including bandwidth management, content filtering, antivirus scanning, etc. will not be used on those connections.
 

Cause
Resolution
Workaround
Additional Information
Bug Number
InQuira Doc IdFAQ208
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Software      SGOS 5.3, SGOS 5.4
Topic      Errors / Event Logs / Alerts, Installation / Configuration, Networking, Performance, Policy Management
Article Number      000010341
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat