How to check the system uptime in the ProxySG appliance CLI

<< Back to Knowledge Search



To check system uptime using the ProxySG appliance command line interface (CLI):

  1. Log in to the ProxySG appliance using a Console/SSH/Telnet connection.
  2. Enter privileged mode using the enable command:
    SGOS> enable
  3. Type the following command at the # prompt:
    show advanced-url /SYSINFO/Version

The CLI displays the current version of the ProxySG appliance and the time since it was last rebooted. Because this information is taken from the Sysinfo file, it might take sometime to appear. The following is an example from the CLI running SGOS

Enable Password:
ProxySG#show advanced-url /SYSINFO/Version
Blue Coat Systems, Inc., ProxySG Appliance Version Information
Version: SGOS
Release id: 54104
UI Version: (54104)
The current time is Tue Mar 8, 2011 23:37:36 GMT (SystemTime 479173056)
The ProxySG Appliance was last hardware rebooted 4 days, 8 hours, 36 minutes, and 32 seconds ago.
The ProxySG Appliance was last software rebooted 4 days, 8 hours, 36 minutes, and 32 seconds ago.
Serial number is XXXXXXXXXX
NIC 0 MAC is 00D08304F884

Additional Information
Bug Number
InQuira Doc IdFAQ1279

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Software      SGOS 4, SGOS 5, SGOS 6
Topic      Configuration / WUI / CLI, Debugging, Operating System
Article Number      000011005
Was this helpful?
Previous MonthNext Month