How to configure audit logs for PacketShaper

<< Back to Knowledge Search



You can use 3CDaemon or Kiwi Syslog Daemon if  you do not have a syslog server.


After you have configured a syslog server, run the following commands on the  PacketShaper to enable audit log being pushed to the syslog server.

setup syslog add host:<syslog server IP address> output:13,7
setup syslog state on

Examples with syslog server IP address

setup syslog add host: output:13,7
setup syslog state on

Examples of syslog output:
May 23 08:48:32 AUDT-6-Audit: Unit Edited: 175-10014148, logged in via "CLI (touch)"
May 23 08:49:12 AUDT-6-Audit: Unit Edited: 175-10014148, Set inbound link to 10000000.
May 23 09:29:39 AUDT-6-Audit: Unit Edited: 175-10014148, Reset the class tree and reverted to default tree.
May 23 09:29:45 AUDT-6-Audit: Unit Edited: 175-10014148, Cannot load the current configuration configuration from file testing.ldi.


Additional Information
Bug Number
InQuira Doc IdKB5128

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      PacketShaper
Topic      Debugging, Errors / Event Logs / Alerts, Installation / Configuration
Article Number      000011042
Was this helpful?
Previous MonthNext Month