How to create or edit Management console port or services through CLI.

<< Back to Knowledge Search



The Management console port or services can be managed through CLI in following manner.

Login into the SG and enter the configure mode

Blue Coat SG210 Series#config terminal

Blue Coat SG210 Series#(config)management-services

Blue Coat SG210 Series#(config management-services)view


This will show the list of existing services, their staus and the ports on which they are running. A sample for HTTPS-Console is shown below.


Service Name:   HTTPS-Console

Service:        HTTPS-Console

Keyring:        55

SSL Protocol version: SSLv2v3TLSv1

Cipher Suite: rc4-md5 rc4-sha des-cbc3-sha des-cbc3-md5 rc2-cbc-md5 rc4-64-md5 d

es-cbc-sha des-cbc-md5 exp1024-rc4-md5 exp1024-rc4-sha exp1024-rc2-cbc-md5 exp10

24-des-cbc-sha exp-rc4-md5 exp-rc2-cbc-md5 exp-des-cbc-sha aes128-sha aes256-sha

Destination IP    Port Range

<All>             8082              Enabled


Now one can also create new service or delete an existing one.

In order to make changes within a specific service go into the edit mode for that particulare service.


      Blue Coat SG210 Series#(config management-services)edit https-console


Here one can define a IP Address/Port that this service will run and enable or disable the service as well.


      Blue Coat SG210 Series#(config HTTPS-Console)enable all 8082


At any point in the CLI enter ?  to get more help with commands

All this thing can be managed in GUI by going to Configuration > Services > Management Service.

Additional Information
Bug Number
InQuira Doc IdFAQ1573

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG
Software      SGOS 5, SGOS 6
Article Number      000011115
Was this helpful?
Previous MonthNext Month