ICAP Settings for ProxyAV 2.x

Solution

Overview

ICAP Settings for ProxyAV 2.x

Cause
Resolution

ProxyAV 2.2 to 2.4

In ProxyAV 2.2, you can set limits on the file sizes allowed to be scanned on the Scanning Behavior page.  Scanning will stop at the specified size.  For information about the maximum allowable limits and the alerts you will receive in the case of file scanning failures due to these limits, please refer to 000013663, Specifying the Limits of Scannable Files in the ProxyAV Configuration and Management Guide.

ProxyAV 2.1

The Maximum file size the ProxyAV can scan (or be configured to) is 512MB; anything above this file size and the ProxyAV fails-closed.  The default is 100MB, which is the Blue Coat recommended value.  To serve files greater than 512MB without scanning, you must configure the ProxySG to fail-open.

In ProxyAV 2.1, the maximum size of files to scan can be configured in the ICAP Settings page.

Click on 000011719 for help with the ProxyAV 2.1 ICAP settings page.

Workaround
Additional Information
Bug Number
InQuira Doc IdKB2900
Attachment

Article Feedback

Did this Article solve your issue?
Additional Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat