Sample WCCP redirection for port 443

Solution

Overview

Sample WCCP redirection for port 443
How do I setup WCCP for port 443 redirection?
You want an example of how to set up wccp for port 443 redirection

Cause
Resolution

This configuration is intended only for environments where the proxy is terminating SSL for a specific website or websites.

Example 1, using service-group 99, and redirect port 443 only

    ProxySG configuration
    wccp version 2
    wccp enable
    service-group 99
    interface 1
    protocol 6
    home-router 10.1.2.3
    service-flags ports-defined
    service-flags source-ip-hash
    ports 443 443 443 443 443 443 443 443
    end

    Example: using CLI to enter WCCP commands on the Router. If the local interface is E0 on the router this should work. If not then add the interface command to the local interface.

      router(conf)# conf t
      router(conf)# ip wccp 99 redirect-list 101
      router(conf)# int e0
      router(conf-if)# ip wccp 99 redirect out

      define an accesslist that only redirects connections destined for the web site to the proxy

        access-list 101 permit ip host any
        access-list 101 deny ip any any
        Workaround
        Additional Information
        Bug Number
        InQuira Doc IdKB1263
        Attachment

        Article Feedback

        Did this Article solve your issue?
        Additional Comments:
         
        Previous MonthNext Month
        SunMonTueWedThuFriSat