What hyperterminal settings to use to connect to the serial console

Solution

Overview

What hyperterminal settings to use to connect to the serial console
You want to know what hyperterminal settings to use to connect to the serial console

Cause
Resolution

To connect to the serial console, use the following hyperterminal settings:

  • BPS: 9600
  • Data bits: 8
  • Parity: none
  • Stop bits: 1
  • Flow Control: none
Workaround
Additional Information
Bug Number
InQuira Doc IdKB1819
Attachment

Article Feedback

Did this Article solve your issue?
Additional Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat