When in watch mode, how does PacketShaper decide which port to use for management access?


<< Back to Knowledge Search

Solution

Overview

PacketShaper decides which port to use for management access by looking at which ports are connected. If an INSIDE or MGMT port isn’t connected to a network, the OUTSIDE port can be used for management. If more than one INSIDE port is connected, only one will be active and pass traffic; the other connected ports will provide redundant management access.

Cause
Resolution

PacketShaper decides which port to use for management access according to the following order:

MGMT (if available)
built-in INSIDE
upper/right LEM INSIDE
lower/left LEM INSIDE.

Note: When the Dedicated Management Port option is enabled, only the MGMT port is used to manage the PacketShaper.


 

Workaround
Additional Information
Bug Number
InQuira Doc IdKB2610
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      PacketShaper
Topic      Networking
Article Number      000015725
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat