Which jumpers need to be removed from PS 1700/3500/7500 models in order to disable the bypass?

Solution

Overview

To implement direct standby operation, you must modify the motherboard to disable the normal bypass relay function of a powered-down PacketShaper. This is done by removing the jumpers.

See Disable Bypass Relays for instructions on removing the jumpers.

Cause
Resolution

The PacketShaper 1700, 3500, and 7500 models contain nine jumpers. All nine of these jumpers will need to be removed in order to disable the bypass feature.

Workaround
Additional Information
Bug Number
InQuira Doc IdKB2605
Attachment

Article Feedback

Did this Article solve your issue?
Additional Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat