Why do I sometimes see disk numbers of greater than 47 on outputs in the eventlogs?


<< Back to Knowledge Search

Solution

Overview

I sometimes see disk numbers of great than 47 on eventlog outputs.  Why?

Cause
Resolution

When disks are re-initialized in place, the original disk process's id is incremented by 48 and a new disk process is created for that disk.  Hence, this value shows that the disk has been reinited for some problem encountered while it was running.  The eventlog message will give more details as per below (for example):

2009-08-23 08:34:55+04:00GST  "Disk 51 - Read error storage_status=00020002,hardware_status=03110102 has occurred at block 0002675D"  0 48007:64 Mailed ../ced.cpp:1465
 
 

Workaround
Additional Information
Bug Number
InQuira Doc IdKB3314
Attachment

Article Feedback

Hide Properties
First Published      10/01/2014
Last Modified      10/01/2014
Last Published      10/01/2014
Article Audience
Product      ProxySG 200, ProxySG 210, ProxySG 510, ProxySG 810, ProxySG 8100
Topic      Errors / Event Logs / Alerts
Article Number      000016390
Summary     
Was this helpful?
Comments:
 
Previous MonthNext Month
SunMonTueWedThuFriSat